X-ray

248 products

  • Pspix 2 Bag & Cardboard Cover Size 0

    Acteon Pspix 2 Bag & Cardboard Cover Size 0

    Pspix 2 Bag & Cardboard CoverQWS134 (Pack 300) Acteon code: 700546

    £140.23

  • IDOT Imaging Plate Set Size 2 - Optime

    Dexis IDOT Imaging Plate Set Size 2 - Optime

    For use with KaVo, Gendex, Soredex and Instrumentarium Phosphor Plate Scanners Equivalent to film size 2 i-Dot version - an individual identification code that appear on the image aiding quality assurance by making it possible to identify the plates Provided with magnetic disk to be grabbed by thedevice without any contact from the operator to avoid cross contamination. Designed for being used for several hundreds of cycles if handled with care and according to the supplied instructionsQWK203 (Pack 6) Dexis code: 901258-PTU

    £258.13

  • IDOT Imaging Plate Set Size 1 - Optime

    Dexis IDOT Imaging Plate Set Size 1 - Optime

    For use with KaVo, Gendex, Soredex and Instrumentarium Phosphor Plate Scanners Equivalent to film size 1 i-Dot version - an individual identification code that appear on the image aiding quality assurance by making it possible to identify the plates Provided with magnetic disk to be grabbed by the device without any contact from the operator to avoid cross contamination Designed for being used for several hundreds of cycles if handled with care and according to the supplied instructionsQWK202 (Pack 6) Dexis code: 901257-PTU

    £258.13

  • Kavo IDOT IP-SET Size 0 DT-1

    Kavo IDOT IP-SET Size 0 DT-1QWK204 (Pack 6) Dexis code: 901256-PTU

    £258.13

  • Smart Plate for CS7600 & CS7200 - Size 4

    Carestream Dental Smart Plate for CS7600 & CS7200 - Size 4

    Smart Plates are available in sizes 0 to 4 to fit every patient and can be reused many times over. Thin, flexible, comfortable plates with no cables are as easy to use as film and come in the same sizes as film Height x Width 57mm x 76mmQWK364 (Pack 4) Carestream Dental code: 5942560

    £252.00

  • Pspix 2 Imaging Plates Size 1 (24 x 40mm)

    Acteon Pspix 2 Imaging Plates Size 1 (24 x 40mm)

    Pspix 2 Imaging PlatesQWS131 (Pack 2) Acteon code: 990216

    £100.48

  • TrollByte Kimera Image Plate Holder Kit #1

    Troll TrollByte Kimera Image Plate Holder Kit #1

    TrollByte Kimera Image Plate holder is made from renewable resources. It has a stiff arm and a softer, flexible claw. The stable arm makes it easy to position the image plate exactly. The softer and flexible claw makes it possible to fine-tune the fit to reduce the risk of tearing the cover. The holder, ring and bit block are autoclavable, maximum temperature 134 ° C. Contains:- 1 TrollByte Kimera Blue for anterior PA and vertical bitewing 1 TrollByte Kimera Yellow for posterior PA 1 TrollByte Kimera Red for horizontal bitewing 1 bite block for anterior PA 1 aiming ringXXB767 (Each) Troll code: 1576043253

    £132.35

  • TrollByte Kimera Sensor Holder Blue 3307

    Troll TrollByte Kimera Sensor Holder Blue 3307

    For anterior PA and vertical bitewing. Contains:- 3 TrollByte Kimera Blue for anterior PA and vertical bitewings 3 bite blocks for anterior PA 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB766 (Each) Troll code: 1571330703

    £132.35

  • TrollByte Kimera Sensor Holder Blue 2607

    Troll TrollByte Kimera Sensor Holder Blue 2607

    For anterior PA and vertical bitewing. Contains:- 3 TrollByte Kimera Blue for anterior PA and vertical bitewings 3 bite blocks for anterior PA 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB765 (Each) Troll code: 1571260703

    £132.35

  • TrollByte Kimera Sensor Holder Yellow 4105c

    Troll TrollByte Kimera Sensor Holder Yellow 4105c

    For posterior PA and horizontal bitewing. Contains:- 3 TrollByte Kimera Yellow for posterior PA and horizontal bitewing 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB758 (Each) Troll code: 1573410513

    £132.35

  • TrollByte Kimera Sensor Holder Kit 4303/3103

    Troll TrollByte Kimera Sensor Holder Kit 4303/3103

    TrollByte Kimera sensor holder is made from renewable resources. It has a stiff arm and a softer, flexible claw. The stable arm makes it easy to position the sensor exactly. The softer and flexible claw makes it possible to fine-tune the fit to reduce the risk of tearing the sensor cover. The holder, ring and bit block are autoclavable, maximum temperature 134 ° C. Contains:- 1 TrollByte Kimera Blue for anterior PA and vertical bitewing 1 TrollByte Kimera Yellow for posterior PA 1 TrollByte Kimera Red for horizontal bitewing 1 bite block for anterior PA 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB753 (Each) Troll code: 1570433103

    £132.35

  • TrollByte Kimera Sensor Holder Kit 3803/2503

    Troll TrollByte Kimera Sensor Holder Kit 3803/2503

    TrollByte Kimera sensor holder is made from renewable resources. It has a stiff arm and a softer, flexible claw. The stable arm makes it easy to position the sensor exactly. The softer and flexible claw makes it possible to fine-tune the fit to reduce the risk of tearing the sensor cover. The holder, ring and bit block are autoclavable, maximum temperature 134 ° C. Contains:- 1 TrollByte Kimera Blue for anterior PA and vertical bitewing 1 TrollByte Kimera Yellow for posterior PA 1 TrollByte Kimera Red for horizontal bitewing 1 bite block for anterior PA 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB752 (Each) Troll code: 1570382503

    £132.35

  • TrollByte Kimera Sensor Holder Endo Kit 3707/2607

    Troll TrollByte Kimera Sensor Holder Endo Kit 3707/2607

    TrollByte Kimera sensor holder is made from renewable resources. It has a stiff arm and a softer, flexible claw. The stable arm makes it easy to position the sensor exactly. The softer and flexible claw makes it possible to fine-tune the fit to reduce the risk of tearing the sensor cover. The holder, ring and bit block are autoclavable, maximum temperature 134 ° C. Contains:- 1 TrollByte Kimera Blue for anterior PA and vertical bitewing 1 TrollByte Kimera Yellow for posterior PA 1 TrollByte Kimera Red for horizontal bitewing 1 bite block for anterior PA 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB751 (Each) Troll code: 1570372607

    £132.35

  • Denoptix Imaging Plates Size 3

    Denoptix Imaging Plates Size 3QWD014 (Pack 2) Gendex code: 08200302

    £117.49

  • STD IP Set Size 2 - Scan Exam

    Dexis STD IP Set Size 2 - Scan Exam

    STD IP Set Size 2 - Scan ExamQWK205 (Pack 6) Dexis code: 901250-PTU

    £239.87

  • Ektavision G High Contrast 15 x 30cm

    Carestream Dental Ektavision G High Contrast 15 x 30cm

    Extraoral Film. This broad selection of extraoral dental film and matching screens can be used for all panoramic, TMJ, and cephalometric dental applications. Expect superb image quality and high resolution with no loss of film speed thanks to Carestream Dental's patented technologies. EVG:- EVG is a Green sensitive, high contrast, zero-crossover film, and is a 400-speed system when used with either EV screens or LANEX Regular Screens.XGK360 (Box 50) Carestream Dental code: 8372716

    £122.53

  • Kwik-Bite with Index (270)

    Kerr Kwik-Bite with Index (270)

    Kwik-Bite is a film and phosphor plate holder for horizontal bitewings (standard bitewings). For assessing approximal caries, overhangs and gaps, crown margins and calculus in the interdental spaces, and also the state of the alveolar ridge. It guarantees perfect radiographs without overlaps and therefore eliminates the need for repetition and unnecessary exposure to X-rays. A direct comparison of radiographs over the years can be made for the same patient. The holder is autoclavable at 134°C for at least 3 minutes. Kwik-Bite is compatible with the most commonly used X-ray film formats (1, 2, 3). Kwik-Bite with ring is also suitable for indirect digital systems. It is compatible with all major brands of phosphor plate sensors Contains 15 x Kwik-Bite with indexXXB028 (Pack 15) Kerr code: 270

    £86.70

  • XCP-DS FIT Endo Only Kit

    Rinn XCP-DS FIT Endo Only Kit

    Reduce loading time during your digital radiograph procedures with the new Stretchy XCP-DS FIT Universal Autoclavable Sensor Holder. Universal design provides a custom fit to your sensor One holder works with both size 1 and size 2 sensors for less inventory Autoclavable for lower cost per use — budget friendly! Rigid sensor support keeps sensor positioned accurately Silicone-cushioned edges help provide patient comfort and prevent sensor cover perforations Use with the XCP-ORA 3-in-1 Positioning System for easy paralleling Kit contents: 1 Endo Ring, 1 Endo Arm, 2 XCP-DS FIT Endo BiteblocksXXB157 (Each) Rinn code: 559908

    £101.83

  • XCP Endo Arm (No Pins)

    Rinn XCP Endo Arm (No Pins)

    XCP Endo Arm (No Pins)XXB262 (Each) Rinn code: 550597

    £69.02

  • XCP Endo (no pins) Indicator Arm

    Rinn XCP Endo (no pins) Indicator Arm

    Stainless Steel. XCP Extension Cone Paralleling Your Key to Accurate Positioning: Works with Film, PSP and Digital Sensors. Quickly align the x-ray tube to media. Accurate positioning and precise x-rays prevent cone cutting. Easy to assemble with colour coded XCP components. Patented colour coding: Anterior-Blue, Posterior-Yellow, Red-Bitewing, Green-Endo Autoclavable for low cost per use For use with: R55-0597 XCP Endo (no pins) Stainless Steel Indicator Arm Dentsply Rinn Biteblocks for film/psp and digital sensorsXXB093 (Each) Rinn code: 550597

    £68.26

  • TrollByte Kimera Sensor Holder Yellow 4307

    Troll TrollByte Kimera Sensor Holder Yellow 4307

    For posterior PA and horizontal bitewing. Contains:- 3 TrollByte Kimera Yellow for posterior PA and horizontal bitewing 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB760 (Each) Troll code: 1573430703

    £126.83

  • Smart Plate for CS7600 & CS7200 - Size 3

    Carestream Dental Smart Plate for CS7600 & CS7200 - Size 3

    Smart Plates are available in sizes 0 to 4 to fit every patient and can be reused many times over. Thin, flexible, comfortable plates with no cables are as easy to use as film and come in the same sizes as film Height x Width 27mm x 54mmQWK363 (Pack 4) Carestream Dental code: 5942552

    £208.00

  • UniGrip Film & Phosphor Plate Holders

    Rinn UniGrip Film & Phosphor Plate Holders

    The Dentsply Rinn Uni-Grip Universal Disposable Sensor Holder is designed to produce an entire full mouth series using only one holder. Sliding the bitepiece along the channels enables you to take anterior, posterior and bitewing x-rays. One per procedure is all you need. Accommodates any #1 or #2 sized film Attaches easily in seconds Reposition bitepiece in a moment Colour coded channels ensure correct positioning Compact size and rounded edges are easy on the patient Pack includes: Pack of 50 disposable UniGrip Holders for Film and Phosphor PlatesXXB216 (Pack 50) Rinn code: 550055

    £87.78

  • TrollByte Kimera Sensor Holder Yellow 4305

    Troll TrollByte Kimera Sensor Holder Yellow 4305

    For posterior PA and horizontal bitewing. Contains:- 3 TrollByte Kimera Yellow for posterior PA and horizontal bitewing 1 aiming ring Please see Related Documents Tab for TrollByte Sensor Guide.XXB759 (Each) Troll code: 1573430503

    £124.07


You have seen 72 out of 248 products

Login

Forgot your password?

Don't have an account yet?
Create account